How does the tensile testing machine test the tensile strength of nylon ropes? We all know that the application of electronic tension machine is very extensive, and it is favored by various industries. Some test techniques are not the same. In front, Haida Xiaobian introduced the test method for shoelaces. Today, we introduce the pair of nylon ropes. Do tensile strength test, the following is the details: First, the purpose of the test Test the tensile strength of nylon rope Second, the test equipment 1, a nylon rope 2, electronic tensile machine 3, HF digital display force gauge Third, the test steps 1. Adjust the equipment horizontally to make it horizontal. 2. Check if the power supply meets the specified requirements. 3. Open the power switch of the control panel. At this time, each button, indicator light and push-pull force meter are in the power-on state. 4, choose the appropriate test speed 5, according to the nylon rope selection must be properly clamped, correctly installed nylon rope test piece 6. Adjust the upper and lower stroke setting ring to the upper and lower limits of the required range. 7. Press the “Down or Rise†button to lower or raise the Lianban plate and start the test. At this time, the display will begin to show the tensile value of the nylon test piece until the test piece of the nylon rope breaks or breaks, the load remains at a minimum. After recording the value, remove the broken or damaged test piece 8. According to the above method, the nylon rope test piece and the display value can be re-tested after zeroing. If the test is completed, please turn off the power. 9. Organize test results according to relevant calculation formulas