Canned Walnut Kernel,Honey Roasted Walnuts,Bulk Canned Food Xianfeng Agricultural And Forestry Products Co., Ltd. , http://www.sx-honey.com
How to care for self-propelled half-feed combine harvesters
In order to maintain a good technical state of the combine harvester, reduce the occurrence of failures, improve work efficiency, and extend the service life of the machine, it is necessary to properly maintain and maintain the machine. Self-propelled half-feed combine harvesters should perform the following maintenance: Pre-class maintenance: Check whether the fasteners are loose and whether the parts are deformed or worn. In particular, in the header section, attention should be paid to whether loosening of the connecting rod of the cutter head is required. If any problem occurs, check the tightness of the drive belt and its chain. If necessary, adjust according to the instructions. Lubrication: Remove dust and accumulated dirt from the surface of the air filter element. When the surrounding dust is high, remove it twice per shift. Check the tightness of various parts of the walking gear, especially the track. If necessary, adjust according to the instructions. For the walking device of pneumatic tires, check whether the air pressure meets the requirements, and if necessary, inflate them; fill the oil and water according to the instructions, and carry out no-load operation for 2 to 5 minutes. 2. After-class maintenance: remove silt, grass, and moving parts from the machine, and if necessary, several times per shift; remove dust and dirt from the whole machine; check if the wearing parts are to be adjusted or replaced; Header, hydraulic handle placed in neutral and locked; put the clutch handle back to the "closed" position, so as to avoid deformation of the spring is often in a compressed state.