Precautions for working in spring peanut film spreader

1 After the machine enters the ground, the ground film is pulled out by hand for about 0.5 meters. The top of the film is buried in the soil and the soil is pressed on both sides of the film to work. The driver should check the quality of ditching, rotary tillage, soil cover, ridge and sowing during work. When the machine is turned to the ground, the film length should be reserved for the artificial replanting and filming.

2 Mechanical work should be maintained in a straight line and at a constant speed to ensure the quality of the film. If the film has oblique wrinkles, stop the pressure of the laminating wheel to make it conform to the left and right and then continue to maintain a straight line. If the film has longitudinal wrinkles, reduce the mechanical advance speed, reduce the clamping force of the film roll, and increase the pressure. The pressure of the film wheel; if the film has lateral wrinkles, the film roll clamping force should be increased, the pressure of the film roll should be reduced, and the mechanical advance speed should be increased; if the film is deflected, the film roll should be realigned. And keep it perpendicular to the direction of advancement, then straight forward at a constant speed.

3 When the local film can not be pressed; first check whether the width of the film is consistent with the width of the film. If it is consistent, increase the pressure of the spring at the end of the film roll; if the local film breaks seriously, reduce the pressure of the film wheel; if the film is curled In severe cases, reduce the shovel angle of the soil shovel and lengthen the distance between the soil shovel and the mulch film.
(send snow)