Electronic floor scale common fault boot does not respond It is also very common for the electronic platform to fail after the boot is started. This type of failure can be first investigated to find the problem. In particular, it is necessary to first check whether it is caused by a fuse or a power cord, and secondly check whether the output of the transformer is normal. If necessary, you can remove the battery and turn it on again to see if it is caused by insufficient battery. After all, many users may not be able to boot when they do not change the battery for a long time. Electronic scales to answer this question; 1. Before using the ground scale, check whether the wiring is loose or cut, and the grounding wire is secure. 2. There should be no foreign objects such as stones and coal blocks in the gap around the scales. The scales and the surrounding bolts must not collide and rub. The performance of each supporting component is good. The overload protection device of the weighing platform should be adjusted at the specified position frequently. . 3. When the vehicle is driving on the weighing platform, it should run straight, the speed is lower than 5KM/H, then gently brake, and stop at the center of the weighing platform as much as possible. 4. When the weighing is over for a long time, the weighing indicator must be cut off to avoid burning the components. Outdoor Solar Camera,Surveillance Camera Wireless,Home Security Cctv Camera,Solar Powered Camera Shenzhen Zuomi Technology Co., Ltd. , https://www.zuomicamera.com