These products are used in direct response to the covid-19 pandemic.
The COVID-19 outbreak has resulted in an urgent need for medical products and solutions. In response, Sinoscience has expanded our production into coronavirus related products, including the VTM tube, nucleic acid extraction reagent and extractor and so on.
Covid-19 Medical Products,Vtm Test Kit,Vtm Transport Tube Kit,Vtm Specimen Tube Kit Jilin Sinoscience Technology Co. LTD , https://www.contoryinstruments.com
How to solve the abnormal noise of rubber tension machine?
Rubber tensile machine is the basic equipment for quality control, feed inspection, physical property test, mechanics research and material development of rubber products enterprises. How should the rubber tension machine be solved if there is a large transmission noise during use? As a professional rubber tensile machine manufacturer Yangzhou Xintianhui here to make a brief description:
1. The screw support bearing is damaged, the operation is not smooth and there is slight vibration. This requires the replacement of damaged bearings in time.
2. Rubber tension machine ball screw nut pre-tightening force is too tight or too loose. Adjust the preload and check the axial yaw value so that the error is not more than 0.005mm.
3. Rubber tension machine ball screw has local strain or wear. Please replace or repair the screw in time.
4. The lubricating oil of the rubber tension machine guide is not enough, causing the slide to crawl. Customers can add lubricant to eliminate lubrication problems.
5. The servo motor is not adjusted well and the gain is too large. The servo motor control system must be adjusted during use.
The rubber tension machine should be inspected and maintained regularly. The screws of the screw nut are not loosened. The screw is regularly lubricated with lubricating oil every month. If abnormal noise is found, it is necessary to stop the inspection immediately. If the abnormality cannot be ruled out, it can be solved with Yangzhou Xintianhui.