Fermentation Bed Breeding Technology With the promotion of pig breeding on the fermentation bed, it has covered chickens in fermentation beds, ducks in fermentation beds, bred geese in fermentation beds, sheep in fermentation beds, cattle in fermentation beds, and so on. The aquaculture technology has been fully approved by the farmer with dry-leaf-fermentation bed technology patents and ten-year-hard experience technology. Our users not only include scattered farmers across the country, but also have fermented-bed ducks in the Inner Mongolia Saphia Group. The First Farm Group Chengde Sanyuan Fermentation Bed Duck, Venus Duck Farm Fermentation Bed Duck, Shandong Linyi, Shandong Jining Fermentation Bed Duck and so on. The main reason for the failure of the fermentation bed during the use of the fermentation bed is mainly due to poor humidity caused by poor management of the fermentation bed, especially in winter when the ventilation is poor and cold. First, the fermentation bed duck pad material too wet: 1, add water to build beds. This is the most probable problem for a water-based fermentation bed. Once the water is controlled, it is easy to appear. Therefore, the Kangxin Fermentation Bed recommends that you use the Kinpo Dry Fermented Bed, without adding water, and the operation is simpler. 2, the density is too large. Fermentation bed culture density is too large, resulting in excessive fecal matter, disintegration, excessive moisture. 3, tipping is not timely or not managed. The tipping depth is shallow, the interval is long, or the fermentation bed is not tipped over. 4, no ventilation. Ventilation and less ventilation, fermentation bed water evaporation does not go out, accumulate over time. 5. The water in the drinking trough or diversion trough enters the fermentation bed, so that moisture other than feces enters the fermentation bed and causes the fermentation bed to become wet. 6. Problems such as high groundwater level, rain pouring, etc., caused the fermentation bed to be too wet. Second, fermentation mattress material processing measures The moisture content of the fermented mattress material generally has specific requirements, such as the fermentation bed requires 40-60%, too much water is not good for fermentation, in particular, excessive moisture causes poor ventilation, slow heating and odor, serious Direct damage to the fermentation bed, unable to continue working. If the litter is already very wet, what should be done? 1, first check the reason to determine the source of moisture. High groundwater levels, backflow of rainwater, problems with drinking troughs and diversion channels, etc., lead to unexpected fecal moisture entering the fermentation bed. Do a repair repair. 2, the external factors of water moisture, the cause of excessive wet fermentation bed humidity we can properly add fresh dry litter, depending on the original litter moisture conditions, the supplementary litter should be dry, the purpose is to absorb some The moisture in the original litter improved air permeability and also dried out. 3, if too wet it is recommended to clear the surface fermentation mattress material above and then add. The cleared litter is dried before use. 4. The most fundamental thing is to increase ventilation and change the moist air in the house from time to time at least once a day. Otherwise, if the humidity in the air is already saturated, do not expect the litter to dry up; this is the most Fundamentally, keep the relative humidity of the air in the room between 50 and 70% to avoid saturation. Ventilation in winter needs to be carried out under the premise of ensuring the temperature of the housing, and it can be performed at noon with higher temperature. 5. During the construction of the housing, increase the lighting area of ​​the house, and the lighting in winter will help the water evaporation of the fermentation bed surface. 6, deep flip. When the litter is overturned, the litter is deeply turned and the depth of overturning is increased. 7, control the breeding density. Reduce the breeding density and reduce the source of faecal moisture. For details, contact Beijing Huaxia Kangyuan Technology Co., Ltd., Power, 18001173107. We're professional Sterilization Cases
manufacturers and suppliers in China, specialized in providing high
quality medical instruments with reasonable price. We warmly welcome you
to buy or wholesale bulk Sterilization Cases for sale here and get quotation from our factory. Sterilization Cases,Sterilization Container,Sterilisation Container,Sterilization Containers Surgical Instruments Tonglu WANHE Medical Instrument Co., Ltd , https://www.vanhurhealth.com