What should you pay attention to when changing the oil?

Precautions for oil change of tension machine

It is very important to change the oil of the rally machine. So what is the oil that is suitable for Zui? The following is a detailed introduction by the engineers of Yangzhou Xintianhui. These are very important information.

First, the tension machine oil change notice:

1. Is the cylinder of the tension machine upper or lower?

2, there is the device is controlled by a microcomputer, the digital display is generally similar to the oil source of the computer.

3. If the tension machine control system is reading the disk (that is, the value is called the dial type by the dial degree), then the oil change is troublesome and the oil source cannot move. In the side of the oil source, a drain port, find a short container, put it bit by bit, pay attention to the position of the weight behind the oil source and the internal things.

Second, put oil:

1, the pipe does not move anything;

2. There is an oil drain at the back of the fuel tank;

3. Raise the control cabinet of the tension machine, pay attention to the computer line and the like when raising the control cabinet; if it is not convenient, you need to remove the pipe, the line and the like, and do the mark before the disassembly to avoid the wrong wiring. .

4. Open the oil drain;

5, oil discharge;

Third, come on:

Put the puller control cabinet down to its original position. If the pipe is removed, first connect the pipe and refuel it. There is a fuel filler port on the fuel tank. Because there is a filter inside, the fueling speed will be slow; if you add oil, The filter can be removed.

Fourth, the amount of fuel:

It is usually added to the two-thirds position of the tank window.

Jiangsu Tianhui Testing Machinery Co., Ltd. specializes in the production of tensile machine series, plastic testing equipment, rubber testing equipment, etc. If you are interested in our products, you are welcome.