How to use pomegranate shell separator?

The pomegranate shell splitter must be installed horizontally and fixed with anchor bolts. The bolts on the whole machine should be tightened to clean the inside and outside of the machine and keep clean. The bearings and reducer parts are required to be well lubricated. Regularly add the specified lubricating oil. Turn on the power supply of each drive motor, confirm that the rotation direction of each transmission device is consistent with the direction sign, test run several times, each time for 5 minutes, cut off the power supply, and re-check according to the above requirements. After confirming the error, you can add the test run to Feeding hopper feeding, if there is more pulp in the slag and separated from the slag, the speed of the stirring shaft reducer can be adjusted when the pomegranate shell separator is running, or the angle of the stirring conveying blade can be adjusted after stopping. Zui good separation effect.

If there is more pulp in the slag and it is not separated from the slag, the spring crushing effect can be achieved by replacing the spring with larger compressive force; if the pulp is discharged slowly, the speed of the sieve can be adjusted. control. How often to check pomegranate broken shell dividing machine motor overload fever, we found undesirable phenomena, must be repaired and the maintenance staff, after stopping the machine, open the pomegranate shelled separator cover, cleaning the residual flesh peel, and the whole machine Keep clean and check the drive belt for aging or cracking. If found, replace it in time. Check if the drive belt is loose or too tight. It is usually appropriate to flip the belt 90 degrees with your fingers. If it is too loose or too tight bottom electrical machine should be adjusted to the lock bolt, keep clean the whole inside and outside the machine.