The advantage of the portable electronic platform is that the table top is thin, light and easy to carry, and it is called the notebook in the scale. The weighing platform adopts a plurality of sealing sensors embedded in the structure of the bottom of the high-strength aluminum alloy weighing platform, and has high weighing precision and excellent sealing effect. Widely used in highway transportation load control, highway law enforcement inspection, automobile safety performance testing, municipal waste disposal, etc. The development and utilization of axle load meter is very convenient for *, municipal, security inspection and other departments. Adult Non-Woven Fabrics Cover,Bacteria Protection Face Mask,3-layer Filter Protective Face Mask, Dongguan Keyutai Mask Co., Ltd. , https://www.maskkytai.com
Portable electronic platform scale (axle weight scale, road detector) features and advantages show
★   Weighing range: (1) Wheel weight: 0~15t ( 2 ) Axle weight: 0~30t ( 3 ) Vehicle weight: 0~1000t 　　
★   Static accuracy: ±0.5% FS ; dynamic accuracy: ±3% FS
★   Product weight: ( 1 ) weighing platform: 27Kg (single)
★   Recommended driving speed: 3-5 km / h
★   Weighing table size: 700mm × 430mm × 30mm . Meter size: 430 × 335 × 170mm
★   Platen weight: 18kg/ block; slope weight : 8kg/ block.
★   The weighing platform is individually calibrated and has a 10- point correction, which greatly improves the accuracy of the product.
★   With time and date display, car number ticket input, meter and two weighing battery battery power monitoring instructions, etc.
★   The digital menu operation is simple and straightforward.
★   Data such as date, car number, ticket number, axle weight, axle group weight, total weight, overweight value, and monitoring unit can be printed.
★   The standard RS-232 interface is used to facilitate connection with a computer.
★   Built-in high-capacity battery, once charged, can be detected hundreds of times , can be powered by car cigarette lighter.
Use after long-term storage, must be fully charged and used; 2. Place the table top in a stable place, place the rubber slope and connect the table to the instrument; 3. Open the instrument panel on/off key; 4. The meter self-test and automatically reset to zero, it can be used normally;
1) Static use: a) Turn on the auto to zero, if there is any amount, please press the zero button; b) the vehicle will drive normally, the front axle will stop on the metering table; c) press the print button to print the front axle weight; d The vehicle is normally driven in, and the rear axle stops on the metering table; e) press the print button to print the weight of the rear axle; f) press the accumulate button to print the total weight;
g) the vehicle has passed;
2) Dynamic use: a) Turn on the auto to zero. If there is a margin, press the zero button b) press the * button, the HOLD word will be displayed in the lower left corner of the display; c) the vehicle will be limited to 10km/h; d) the printer will automatically print Front axle and rear axle weight; e) Press the accumulation key to print the total weight;