Planting process 1. Choose the planting site; 2. Stir the culture material; 3. Pack the culture material; 4. Sterilize at high temperature; 5. Inoculate; 6. Culture. Precautions Every step requires careful attention. Sawdust soaking in advance is beneficial for sterilization. If wooddust is used as the culture material for planting fungus, it needs to be soaked one day in advance. This can improve the effect of high temperature sterilization and sterilize more thoroughly. The fungus planted afterwards is not susceptible to infection. Be cautious about bagging. A good fungus bag should be filled tightly and tightly up and down. The mouth of the bag should be neat and flat. There is no loose material. Drilled out of the bacteria bag. If the mouth of the fungus bag is not sealed, air will enter the fungus bag during the inoculation of the fungus, which is prone to pollution, and the sterilization should be thorough. Qualified bacteria bags will be sterilized at a high temperature on the same day, which will cause miscellaneous bacteria overnight and are prone to fermentation and spoilage. Keep the temperature in the sterilizer at more than 100 ° C, drain the cold air for 10 hours and then bore for more than 3 hours to ensure thorough sterilization. The inoculation should be fast and aseptic. The high-temperature sterilized bag must be cooled to below 30 ° C before inoculation, otherwise it may kill the fungus. When you inoculate fungus, you have to move fast, and you must ensure that it is carried out in a sterile environment. After the inoculation, put the bacteria bag into the culture room and you can wait for the fat and tender fungus to grow. Disclaimer: Some articles of this website are transferred from the Internet. If the legal rights of third parties are involved, please inform this website for processing. phone Electric Fan Heaters,Portable Electric Heaters,Small Electric Heater,Electric Portable Heaters Ningbo Shuangtuo International Trade Co., Ltd. , https://www.nbst-sports.com