Dehydrated Green Bell Pepper Flakes Green Bell Peppers,Green Bell Pepper Flakes,Dried Green Bell ,Green Bell Dried Shanghai Sinospices Sourcing Ltd , https://www.garlicall.com
Introduction to the working principle of various labeling machines
The technology boosts the automatic labeling machine continuously. The equipment can also be customized according to the requirements of the customers, so that each customer can use the satisfactory products. The equipment is also realized in the whole labeling process. The liberation of the labor force, automatic extension of the label, automatic labeling. The entire labeling process was fully automated, and the labeling speed was eight times that of the original manual labeling, which was three times the labeling speed of the original semi-automatic labeling machine. The appearance of the automatic labeling machine not only makes the speed of the labeling machine greatly improved, but also makes our labeling effect beautiful, and the label that is posted does not have the phenomenon of blistering and wrinkling.
The labeling machine must strictly follow the working procedure in the working process. In the conveyor belt type process, if there is an error in the middle, if the maintenance is timely, it is an absolute guarantee for the work flow, which requires the staff to have a certain familiarity with the labeling machine. . Below we briefly understand how the labeler works:
How the labeling machine works
1, the core working principle
1) Principle of stripping: relying on the rigid elastic force of the label itself is greater than the adhesion between the label and the label backing paper, the label bottom paper is 172 degrees sharply turned, forcing the label to separate from the label bottom paper, thereby achieving “peeling off†purpose.
2) Principle of delivery: The label bottom paper is pulled by the traction mechanism, and the label is moved on the stripping mechanism. The label bottom paper is rotated about 172 degrees at the corner of the stripping plate. The label is more rigid than the label and the label. Adhesion, not following the label liner, but separated from the label liner, the label liner is continuously pulled, and the label is also continuously fed out, thereby achieving the "send" action.
3) Principle of overcoating: For labels attached to the surface to be attached, relying on objects such as a round roll/brush, film, etc., by applying a linear force in sequence, the “overlay†action is achieved.
2, the working principle of plane labeling machine
1) Working principle of fully automatic plane labeling machine: The sensor detects the product passing and returns the signal to the labeling control system. After the signal is processed by the PLC, the label is sent at the appropriate time and attached to the designated position of the product. The product flows through the labeling. The device is covered with a secure label and the attachment of a label is completed.
2) Semi-automatic plane labeling machine works: the sensor detects that the product is in place or the foot sends out the product in-position signal, sucks the label of the label to drop the label and overwrites the label, then returns to the original position to absorb the next label, waiting for the next labeling The signal, the attachment action of a label is completed.
3, the working principle of the round bottle labeling machine
1) Automatic round bottle labeling machine 1: Principle: After the separation mechanism separates the products, the sensor detects the product passing, returns the signal to the labeling control system, and controls the system to send the label and attach it at the appropriate position. When the product is to be labeled, the product flows through the coating device, the labeling belt drives the product to rotate, the label is rolled, and the labeling action of one label is completed.
2) Semi-automatic paste labeling machine working principle: the device gets the product in place signal, the device automatically separates a label. After the label is glued, it is attached to the specified position of the product, and the product is labeled and overlaid at the same time. The label is pasted and overlaid on the product, and the attachment action of a label is completed;
4, semi-automatic round bottle labeling machine works
1) Single label: The worker puts the bottle in the labeling position, the device provides power to make the bottle rotate, and sends a label attached to the bottle.
2) Double label: The worker puts the bottle on the labeling position. The device provides power to turn the bottle. First, a label is attached to the bottle, and the bottle continues to rotate. The device then sends out the second label attached. On the bottle, the positive/back label is simultaneously labeled (two label intervals are adjustable);
3) Circumferential positioning labeling: The worker puts the bottle in the labeling position, and the device provides power to make the bottle rotate. After the automatic sensor senses the positioning point on the bottle, the device sends a label attached within a certain period of time. On the bottle (delay time adjustable), the fixed point labeling is completed.
4) Working principle of manual round bottle labeling machine: The worker puts the bottle in the labeling position, turns the hand wheel, sends out the label and drives the bottle to rotate, to achieve labeling and labeling.
6, automatic side + round bottle multi-function labeling machine working principle
1) Flat bottle side labeling: the sensor detects the product passing, returns the signal to the labeling control system, controls the system to control the delivery of the label at the appropriate position and attaches it to the product to be labeled position, the product flows through the labeling device, the label The cover is attached to the product, and the attachment of one label is completed (two sides are simultaneously sent out on both sides).
2) Round bottle circumference single standard: put the product into the conveyor belt, enter the separation mechanism, after the separation mechanism separates the products, the sensor detects the product passing, returns the signal to the labeling control system, and controls the corresponding motor in the appropriate position control system. The label is sent and attached to the product to be labeled, and the labeling action is completed.
3) Double round circumference of the round bottle: put the product into the conveyor belt, enter the dispensing mechanism, and after the separation mechanism separates the products, the sensor detects the product passing, returns the signal to the labeling control system, and controls the corresponding motor in the appropriate position control system. The label is sent and attached to the product to be labeled, and the labeling action is completed. The bottle continues to rotate. Within a certain period of time, the device sends out a second label attached to the bottle, and the positive/back label is simultaneously labeled (the two labels are adjustable).
6, semi-automatic arc surface labeling machine working principle
The sensor detects that the product is in place or the foot sends out the product in-position signal, the cylinder pushes the labeling platform to the labeling position, the label is sent out, the labeling platform performs circular motion, the labeling is simultaneously covered, the label is sent, the labeling platform is returned, and the labeling is completed. A labeling process.
7, side and labeling machine working principle
Fully automatic double-sided (single-sided) labeling machine working principle : the sensor detects the product passing, returns the signal to the labeling control system, and controls the system to control the delivery of the label at the appropriate position and attach it to the product to be labeled. After passing through the coating device, the label is attached to the product, and the attachment of one label is completed (two sides are simultaneously sent out on both sides).