1) The electromagnet does not pick up. The cause of this failure is mostly the internal fault of the main unit, the electromagnet coil is blown, and the line is interrupted. The solution is: first check whether the main or external problem is caused by the main unit. Packaging machine Carbon Monoxide,Carbon Monoxide Sensor,Carbon Monoxide Fire Alarm,Carbon Monoxide Alarm Guangdong Isafenest Co.,Ltd. , https://www.isfenest.com Packaging machine fault diagnosis and solution
Secondly, check the electromagnet fuse to see if the electromagnet has signs of energization, eliminate the mechanical jam, and test the internal power pillow packaging machine under normal conditions.
2" In the weighing packaging machine often encountered is the cause of this failure is: sensor damage, bridge voltage fault pillow packaging machine, line connection or interruption is wrong, the elimination method is: detection sensor and connection Or the load signal of the host, the detection of the bridge and the amplifying circuit or the computer output display circuit, sometimes the system stability is not good, resulting in unstable bagging. This problem can be tested whether the line is faulty, or the host is removed. The internal short circuit applies a clear signal to determine whether the fault is in the machine or from the switch, and then solve the problem pillow packaging machine.