Hydraulic Road Blocker,Road Blocks,Hydraulic Road Blocker,Road Blocker Shenzhen Unisec Technology Co.,ltd , https://www.uniqscansecurity.com
2. The mixing tank Xiangda mixing tank is U-shaped body, made of stainless steel, equipped with stirring paddle. It is lying on the mixing reducer and the dumping material 3. The dumping speed reducer is used to control the positioning angle of the mixing tank. It is located at On the left side of the machine, the motor in the machine base is driven by the V-belt to drive the worm and the worm wheel to drive the mixing tank to rotate at a certain angle range, so that the mixture is poured out at a time.
4. The base of the machine base and the motor unit is a whole structure. The motor is mounted on the movable plate on both sides of the machine base. The upper and lower sides of the motor can be adjusted by the screw to make the V-belt get a certain tightness and maintain the transmission force.
On the reducer.
Schematic description of the structure of the trough mixer
1. Stirring reducer The reducer is the main transmission structure of the mixer. It is located on the right side of the machine. When the machine is working, the motor in the machine passes the V-belt drive worm and worm gear to drive the mixer at a speed of 1:40. The worm gear shaft is hollow and equipped with fixed keys, which can freely assemble and disassemble the stirring paddle. Two ring screws are mounted on the top of the reducer for assembly and disassembly and installation. The end cap is equipped with a screw for high-speed stirring paddle positioning, which has been adjusted at the factory, and generally does not need to be adjusted during use.