Rat substance P ELISA KiT

Product number: EIA06710
Read the instructions thoroughly before use. The enzyme-linked immunosorbent kit is based on the principle of classical enzyme-linked sandwich technology and can measure rat substance P. It can only be used for research purposes and should not be used for medical diagnosis.

working principle
Substance P is a polypeptide that is widely distributed in the nervous system and other peripheral tissues and organs and has various physiological functions. Substance P can affect lymphocyte proliferation and cytokine synthesis, and can regulate the activity of complementary cells to synthesize cytokines and other immune cells, thereby participating in immune regulation; substance P also regulates the secretion of reproductive hormones, mainly gonadotropins, and Affects reproductive endocrine function. The ELISA kit provided is a typical sandwich enzyme-linked immunosorbent assay kit (ELISA). The pre-coated antibody is a monoclonal antibody, and the detection phase antibody is a polyclonal antibody, which is labeled with biotin. The sample and the biotin-labeled antibody were sequentially added to the wells of the plate, and washed with PBS or TBS. The peroxidase-labeled avidin reaction was then added; after thorough washing with PBS or TBS, the substrate was developed with TMB. TMB is converted to blue under the catalysis of peroxidase and converted to the final yellow color of zui under the action of an acid. The depth of the color is positively correlated with the factor to be tested in the sample.

Content in each kit (96T)

Material quantity standard 96T (2vial)
96-well plate 96T (8×12) pre-coated with antibody
Biotinylated antibody 96T (1:100)
ABC (Avidin-Peroxidase Complex) 96T (1:100)
Sample dilution 96T×2
Antibody dilution 96T×1
ABC dilution 96T×1
TMB coloring solution A 96T×1
TMB color developing solution B 96T×1
TMB stop solution 96T×1
ELISA special washing liquid 96T×1 (1:25)

Reagents and equipment that are needed but not provided
1. 37 ° C incubator.
2. Standard specification microplate reader.
3. Automatic washing machine.
4. Single or multi-channel adjustable pipettes and their tips.
5. Distilled water, volumetric flask, etc.
6. Clean test tubes and Eppendof tubes.

Precautions
1. The kit taken out at -20 ° C was thawed overnight at 4 ° C. Each bottle of the thawed solution in the box should be gently shaken before opening the cap to avoid delamination during thawing, otherwise uneven concentration will occur.
2. Allow room temperature to equilibrate for at least 30 minutes before opening the kit.
3. When preparing various reagents, remember to mix!
4. When the user first uses the kit, the various reagent tubes should be centrifuged for a few minutes to allow the reagents to collect at the bottom of the tube.
5. It is recommended that all standards and samples be tested in duplicate.
6. It is necessary to strictly avoid drying of the microplate during operation. Drying will quickly deactivate the biological components on the microplate!
7. To avoid cross-contamination, avoid reusing the tips and tubes in your hand.

Washing method: Manually washing the plate: aspirate (not touch the wall) or pry off the liquid in the plate; pour a few layers of absorbent paper on the bench, and take a few times with the plate; use the recommended PBS or TBS wash buffer was injected into the well at least 0.35 ml and soaked for 1-2 minutes. Repeat this process several times as needed.
Automatic washing: If there is an automatic washing machine, it should be used in the formal experiment after skilled use.

Preparation and storage of samples If not immediately analyzed, they should be stored separately and stored frozen, and avoid repeated freezing and thawing.
Serum - Blood was collected in a clean tube, coagulated at room temperature for 2 hours or overnight at 4 ° C, centrifuged at 1000 x g for 10 minutes, and serum was collected. Immediately analyze or dispense and store at -20 °C.
Cell culture, tissue homogenate, body fluid - centrifugation to remove the precipitate, immediately analyzed or dispensed and stored frozen at -20 °C.

General Principles of Sample Dilution The user must consult the literature to understand the amount of the test factor in the sample and determine the appropriate dilution factor so that the concentration of the test factor in the diluted sample is within the range of the ELISA kit. The dilution of the sample should be recorded in detail.

Reagent preparation and storage
A. Dilution and use of standards: dilution and use of standards: Prepare within 2 hours prior to use. Add 1 ml of the sample dilution to the lyophilized tube, dissolve it thoroughly, and dilute it.
The diluted standard was used within 2 hours.

B. Biotinylated antibody working solution: Prepared within 2 hours before use.
1. According to the need of 0.1ml per hole to calculate the total amount (in the actual preparation should be prepared 0.1-0.2ml).
2. The working solution was prepared in a ratio of 10 ul of biotin-labeled antibody plus antibody dilution 990 ul. Mix gently.

C. Preparation of avidin-peroxidase complex (ABC) working solution: Prepared within 1 hour before use.
1. According to the need of 0.1ml per hole to calculate the total amount (0.1-0.2ml should be prepared when the actual preparation).
2. The working solution was prepared in a ratio of 10 ul of avidin-peroxidase complex (ABC) plus ABC dilution 990 ul. Mix gently.

D. Preparation of TMB coloring working solution: TMB coloring working solution is prepared according to the ratio of TMB coloring solution A 9 parts and TMB coloring liquid B 1 part 30 minutes before use.

Operating procedure
1. Determine the number of well-coated antibody plate wells required for this assay.
2. 0.1 ml of each of the diluted standards was sequentially added to a row of 7 wells, and only 1 sample of the dilution was added as a control. The treated specimens were added in 100 ul per well.
3. The plate was capped and reacted at 37 ° C for 90 minutes.
4. After the reaction, the liquid in the microplate is sucked by an automatic washing machine; or the liquid in the microplate is removed, and then the absorbent paper is photographed a few times. Wash twice.
5. The prepared biotin antibody working solution was added in order of 0.1 ml per well. The reaction was carried out at 37 ° C for 60 minutes.
6. Wash 3 times with 0.01 M TBS or 0.01 M PBS, soak for about 1 minute each time.
7. The prepared ABC working solution was added in order of 0.1 ml per well. The reaction was carried out at 37 ° C for 30 minutes.
8. Wash with 0.01 M TBS or 0.01 M PBS 5 times, soak for 1-2 minutes each time.
9. TMB coloring working solution was added in order of 0.1 ml per well, and the reaction was avoided at 37 ° C in the dark. During the reaction, it was necessary to observe frequently. When the naked eye could see the first 3-4 holes of the standard product, there was a clear gradient blue. When the difference in pores is not obvious, TMB stop solution can be added at 0.1 ml/well. (The color reaction is not longer than 30 minutes).
10. The OD value was measured at 450 nm using a microplate reader.
11. Find the corresponding concentration on the coordinates based on the absorbance of the sample. Users can also use a variety of application software to calculate. It should be remembered that since the sample is diluted N times, its actual concentration should be ×N.

Summary of operating procedures:
Prepare reagents, samples and standards

Add prepared samples and standards and react at 37 ° C for 90 minutes.

Wash the plate twice, add biotinylated antibody working solution, and react at 37 ° C for 60 minutes.

Wash the plate 3 times, add ABC working solution, and react at 37 ° C for 30 minutes.

Wash the plate 5 times, add TMB coloring solution, 37 ° C reaction

Add TMB Stop Solution

Read OD within 30 minutes

Calculate the test factor content of the specimen

Detection range: 500pg/ml → 7.8 pg / ml.
Sensitivity: <3pg /ml
Specificity: There is no cross-reactivity between the system and other factors.
Storage: -20°C [4°C in short term (eg two weeks)]
Validity: 12 months (-20 ° C).
Uses: For the in vitro quantitative analysis of liquid specimens (universal type).

REFERENCES
1. Nature 304: 167-169 (1983).
2. Oncogene 4: 1477-1481 (1989).
3. Cell 47: 277-284 (1986).
4. Genomics 27: 67-82 (1995).
5. Nature 330: 386-388 (1987).
6. Leukemia 8: 343-344 (1994).
7. Genomics 74: 12-20 (2001).
8, Cell 127: 635-648 (2006).
9, Cell 131: 1190-1203 (2007).
10. Mol. Cell. Proteomics 6:537-547 (2007).

The sow through is our Honde brand of high quality sow raising equipment, made of high quality stainless steel SST 304 and featuring automatic welding technology with a thickness of 1mm to 1.2mm and the robustness of the sow through. The depth of the sow through is moderate, which allows it to contain enough food and avoid food waste. The size of the sow through There are many, to meet different needs, it is very convenient. At the same time, the edge of the sow through is smooth and strong, preventing pigs from being harmed while using it. the sow through makes it easy and convenient for your sow to feed, and sows that have used the sow through grow well.

Sow Trough

Sow Trough,Sow Plastic Trough,Plastic Sow Feed Trough,Sow Feeding Trough,Pig Feed Trough

HuangHua FengYi Honde Metal Factory , https://www.farrowingcratesfromchina.com