The main points of the digital dynamometer operation process

We often talk about the precautions for the operation and use of the digital dynamometer . Today, the senior sales and engineers of Shanghai Shigan Industrial Co., Ltd. explain the various warnings of the digital dynamometer operation process, because if it is not properly operated Serious damage to the digital dynamometer and the price of the digital dynamometer is not cheap.

The main points of the digital dynamometer operation process:

1. In the destructive test, protective masks and gloves should be worn to prevent splashing substances from occurring during the test.

2. Do not use clamps that are damaged or severely deformed.

3. Do not overload the instrument. Failure to do so may result in permanent damage to the sensor or even an accident.

4. When the test value exceeds 105% of the full scale, the buzzer will continue to beep. In this case, please quickly release the added load or reduce the load.

5. Please use the data line communication provided by our company, otherwise it will cause permanent failure of the instrument.

6. If it is dedicated to testing thrust or tension, do not use the test rod to bend or tighten.

7. Use the matching charger to charge.

8. Do not use a power supply other than the rated voltage of the charger, otherwise it may cause electric shock or fire.

9. Do not pull out or insert the plug with wet hands, otherwise it may cause electric shock.

10. Do not pull the charger's power cord to pull out the plug, so as to avoid the electric wire being broken and being shocked.

11. Dip the cloth into the water with detergent and wring it out to remove dust and dirt.

12. Avoid using digital dynamometers in the following environments: wet, dusty, and surrounded by sources.

13. Please use and store within the specified temperature and humidity range, otherwise the instrument may malfunction.

14. Do not disassemble, repair or modify the machine by yourself. If you find any problem, you can contact the service provider of the instrument for further processing. The above is the fourteen points of the digital dynamometer operation process. After zui, Shanghai Chucheng test equipment engineer reminds: If it is to test the impact load, please select the model whose range is twice the impact load value.