Adult back massage
Pedicure Spa Chair It is divided into electric and robotic. Difference between
robot and electric: 1. The robot has one more function than electric to insert
audio data. 2. The back of the robot only has 4 massage bead up and down
activities massage, electric backrest has 8 massage beads fixed massage. 3. The
price of the robotic arm is 1,000 yuan more than that of the electric motor.
There is an eggshell outside the massage chair. It mainly looks like high-end
atmosphere. The chair neck and shoulder chair 4 kneading balls and the back
waist a set of four kneading balls. Pinch massage, buttocks vibrating four
vibrating cycle massage, the back of the chair lying back, the seat before and
after manual remote adjustment, chair armrests have open cup holes, armrests can
be up and down 90 degrees activities. The principle of the massage chair is to
use mechanical rolling force and mechanical force to massage. For normal
people, artificial massage can enhance the body's natural resistance to disease
and achieve health effects. However, the mechanical massage of the massage
chair is different from the manual massage. Although the massage chair has
several contacts, it cannot select points, acupuncture points, and perform
similar artificial massage actions, but imitates the actions of [kneading" and
[pinching" by humans. Therefore, the massage chair can only eliminate fatigue,
relieve discomfort, and play a relaxing role, and its strength is not easy to
control, the strength is small, and the effect is not great. When the strength
is large, muscle pain will be caused.
Adult Back Massage Pedicure Spa Chair Adult Back Massage Pedicure Spa Chair,Pedicure Foot Spa Massage Chair,Beauty Salon Pedicure Chair,Back Massage Pedicure Spa Chair MING MEI ROYAL SPA FURNITURE , https://www.mingmeibeauty.com
(2) During the operation, the soil layer contaminated on the inner wall of the machine should be cleaned in time as appropriate to avoid increasing the load and aggravate the abrasion of the hammer claw or the slanting knife.
(3) Check the hammer claw or flick knife wear, must be replaced when replaced, in order to maintain the dynamic balance of the cutter shaft, to classify the same group of hammer claws by quality, the weight difference is not more than 25 grams, the same weight of the hammer claw Or the knife can be mounted on the roller.
(4) When replacing the bearings of the two 53512 bearings, three M16 bolts (with a length of not less than 70mm) can be used to lift the bearing out of the process disc at the rear of the bearing.
What are the maintenance and maintenance of straw smashing returning machine?
(1) Gear oil should be added to the gear box. Generally, the height of the oil surface should be immersed in the oil surface by one third. When it is required to finish maintenance of the implements every year, the transmission should be cleaned and the gear oil should be changed. Each batch of grease that needs to be injected (operating for 10 hours) should be filled with butter once.