Rinse pendulum grinding riveting machine pneumatic system fault diagnosis steps

The fault diagnosis procedure for the air pressure system of the sun swaying riveting machine. Rizhao pendulum grinding riveting machine which is good, Rizhao pendulum grinding riveting machine which is good, Rizhao pendulum grinding riveting machine manufacturer which is good, Rizhao pendulum grinding riveting machine brand which is good, want to buy Rizhao pendulum The riveting machine was chosen by Shanghai Yuyou. Shanghai Yuyou Precision Automation Equipment specializes in the design, manufacture, installation, sales and commissioning of supercharged products, pneumatic riveting machines, non-standard custom, rotor dynamic balancing machines and fixtures. Since its inception, it has been focusing on the field of precision automation equipment, and is committed to providing customers with more and better choices.

Rizhao pendulum rotary riveting machine is mainly assembled by rotation and pressure. It is mainly used in the occasion of riveting of rivets (hollow rivets, hollow rivets, solid rivets, etc.). Commonly used are pneumatic, hydraulic and electric, single and double heads, etc. Specifications and models. A method of riveting the static pressure generated by the riveting device to form a boring bar is called riveting. The riveted rivet has the characteristics of good surface quality, small deformation and high joint strength. Therefore, in actual operation, as long as the structural processability allows, the riveting is preferred. Rivets can generally be used instead of screws to connect multiple parts together. The advantages are very obvious. In the case of sturd, the parts can be rotated. Generally, the rivets are made by the riveting machine, although the equipment is relatively small. However, there are still many aspects to be aware of when using it.

The failure of the air pressure system of the Rizhao Riveting Riveting Machine is often caused by the failure of a component in the system. Therefore, it is necessary to find out the faulty components. The following are the common steps to diagnose the failure of a pendulum riveting machine:

*Step, whether the rotary riveting machine is operating normally. Whatever the reason, it can be summarized into three major problems: flow, pressure and direction.

In the second step, the pressure loop diagram is reviewed and each component is inspected to confirm its performance and function, and its quality condition is initially assessed.

The third step is to list the components related to the fault and analyze them one by one.

In the fourth step, the components listed in the list are sorted according to past experience and component difficulty.

In the fifth step, the initial inspection of the key inspection components listed in the list is performed.

In the sixth step, if the initial inspection does not detect the fault, it should be checked repeatedly with the instrument.

In the seventh step, the faulty component is identified and the unqualified component is repaired or replaced.

In the eighth step, before restarting the riveting machine, you must carefully consider the cause and consequences of the failure.

Rizhao pendulum grinding riveting machine | Rizhao pendulum grinding riveting machine brand | Rizhao pendulum grinding riveting machine manufacturer | Rizhao pendulum grinding riveting machine equipment provided by Shanghai Yuyou Precision Automation Equipment Co., Ltd. The company has excellent processing equipment, strong R & D team and tough technical team, constantly introducing advanced technology, developing new products, and launching a series of products with advanced level in the same industry: for example, Rizhao pendulum milling riveting machine and other products. At the same time, we design non-standard automation equipment, non-standard fixtures and special production lines for special industry customers.